Advertisement
u)
TUNER/BAND
Jr',
VOLUME
_/I
VOLUME
POWER
TUNE MODE
FM MODE
DOWN, UP
V TUNING/k
SELECTOR
Radio stations can be tuned
manually
by selecting
the station's
frequency or they can be preset into channels to make it easy to tune
(=, page 23).
Unless otherwise indicated, frequency display examples shown are
from the model for the U.S.A., Canada, and units with PX printed on
the outer packaging.
Preparation
Press [_/I POWER] to turn on the unit.
1
Press
[SELECTOR]
to select
"FM"
or
"AM".
Each time you press the button:
DVD/CD-_ FM-_AM-_TV-*VCR-_AUX
f
I
eRemote control: Press [TUNER/BAND].
3
Press [TUNING
(v or ^)]
to select the
frequency
of the required
station.
Displayed when a stereo FM broadcast is being received.
Displayed when a radio station is tuned.
Press and hold [TUNING (V or ix )] until the frequency starts
scrolling to start automatic
tuning. Tuning stops when a sta-
tion is found.
4
Adjust the volume.
If noise
is excessive
in FM
Main unit only
Press [FM MODE] to display
"MONO".
]
This mode improves
sound quality if reception is weak but broad-
casts are heard in monaural.
Press [FM MODE] again to cancel the mode.
The mode is also canceled when you changed the frequency.
Turn "MONO" off for normal listening.
Stereo and monaural
broadcasts
are automatically
played as they
are received.
Allocation settings
]
Main unit only
Each country allocates broadcast bands according to their particular
system.
You can change the FM step. The step is factory-set to 0.2 MHz, but
you can change it to receive broadcasts allocated 0.1-MHz steps.
You can change the AM step. The step is factory-set
to 9 kHz, but
you can change it to receive broadcasts allocated 10-kHz steps.
(_ Press [SELECTOR]
to select "FM" (for either band).
(_) Press and hold [SELECTOR].
After a few seconds, the current minimum frequency flashes on
the display. Continue to hold the button down. The minimum fre-
quency changes and the step is changed.
To return to the original step, repeat the above steps.
2
Press
[TUNE
MODE]
to
select
"MANUAL".
Each time you press the button:
MANUALHPRESET
Preset in channels (FM and AM) will be changed by this procedure.
Preset them again.
RQT6183
Advertisement
