Lionel K-LINE PA-1 Manual page 5

• The digital language of TrainMaster Command Control—not track power—controls the actions of Command-equipped locomotives. Track
power is like gasoline in the tank of your car – it gives you the power to go places, but it doesn't tell you where to go or how fast to get there.
• Throttle up or press any command button on CAB-1. RailSounds starts up. Your locomotive will respond to your every command.
CAB-1 COMMANDS
Locomotive RailSounds effects in bold italic.
Press AUX1 to activate the keypad.
Air release sound.
Press AUX2 to turn your locomotive's
headlight on and off.
Front Cou Front Coupler Release Front Coupler Release .
Rear coupler releases.
Coupler release sounds.
Press HALT to stop all
Command-equipped locomotives
in operation. Use HALT only in
emergency situations.
Turn the THROTTLE to the right to
accelerate, left to decelerate.
Speed dependent variable.
CAB-1 numeric keypad commands
When you press AUX1 on CAB-1, you turn the numeric keypad into 10 command buttons. The keypad "stays open" and gives you access to extra
command features until you press any top-row button
0 Stops and resets the locomotive to FORWARD. Horn blows, RPM's return to automatic.
1 Raises the volume of RailSounds.
2 CrewTalk is the sound of walkie-talkie communication.
3 Starts-up RailSounds. Start-up sequence commences. RPM's increase.
4 Lowers the volume of RailSounds.
5 Activates the RailSounds shutdown sequence. Just like the real thing, your locomotive must be idle for
shutdown to occur. Press 6 repeatedly to lower RPM's to idle. Press 5 to initiate shutdown and listen for CrewTalk.
6 Lowers RPM level.
7 TowerCom is an audible tower announcement.
8 Turns off the smoke generator. Air Release sounds.
9 Turns on the smoke generator. Press and hold (10 seconds maximum) to momentarily boost smoke output. Air release sounds.
4
Press WSTL/HRN to activate diesel d diesel
horn horn, release to discontinue.. horn, release to discontinue..
Press BELL once to activate the
diesel mechanical bell sound, d, d
again to discontinue.
Press DIR—the locomotive decelerates
to a complete stop; turn the throttle up,
and the locomotive moves in the opposite
direction. There is no neutral.
Diesel Diesel air-release sound. Diesel air-release sound.
Press and hold BOOST for extra
power. Release BOOST and return to
the locomotive's previous speed.
Press and hold BRAKE to slow down
or stop.Release BRAKE and return to
the previous speed.
Squealing break sounds.