Yamaha PSR-S710 Reference Manual page 53

[7 ▲▼]/
PEDAL PUNCH
[8 ▲▼]
IN/OUT
3
While holding the SONG [REC] button, press the desired track button.
4
Press the SONG [>/ ❙ ❙ ] (PLAY/PAUSE) button to start Punch In/Out recording.
Play the keyboard at the Punch In point and stop recording at the Punch Out point.
5
Press the [I] (SAVE) button to execute the Save operation.
CAUTION
The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-
tion.
■ Examples of re-recording with various Punch In/Out settings
This instrument features several different ways you use the Punch In/Out function. The illustrations below
indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
REC START setting
REC END setting
Start overwrite
recording *1
NORMAL
REPLACE ALL
Start overwrite
recording *1
NORMAL
PUNCH OUT
Start overwrite
recording *1
NORMAL
PUNCH OUT AT=006
Play back
original data
FIRST KEY ON
REPLACE ALL
Play back
original data
FIRST KEY ON
PUNCH OUT
Play back
original data
FIRST KEY ON
PUNCH OUT AT=006
Play back
original data
PUNCH IN AT=003
REPLACE ALL
Play back
original data
PUNCH IN AT=003
PUNCH OUT
Play back
original data
PUNCH IN AT=003
PUNCH OUT AT=006
When this is set to ON, you can use Foot Pedal 2 to control the Punch In
and Punch Out points. While a Song is playing back, pressing (and hold-
ing) Foot Pedal 2 instantly enables Punch In recording, while releasing
the pedal stops recording (Punch Out). You can press and release Foot
Pedal 2 as often as you want during playback to punch in/out of overwrite
recording. Note that the current function assignment of the Foot Pedal 2
is cancelled when the Pedal Punch In/Out function is set to ON.
Pedal Punch In/Out operation may be reversed depending on the particular pedal you've connected
NOTE
to the instrument. If necessary, change the pedal polarity to reverse the control
Original data
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Play the keyboard to start
overwrite recording
1 2 3 4
Play the keyboard to start
overwrite recording
1 2 3 4
Play the keyboard to start
overwrite recording
1 2 3 4
Start overwrite recording
1 2 3 4
Start overwrite recording
1 2 3 4
Start overwrite recording
1 2 3 4
5 6 7 8
Stop recording *2
5
Deleted
Stop recording *2
5 6 7 8
Stop overwrite recording/
play original data
5 6 7 8
Stop recording *2
5 Deleted
Stop recording *2
5 6 7 8
Stop overwrite recording/
play original data
5 6 7 8
Stop recording *2
5
Deleted
Stop recording *2
5 6 7 8
Stop overwrite recording/
play original data
5 6 7 8
PSR-S910/S710 Reference Manual
(page 90).
*1 To avoid overwriting measures 1–2,
start recording from measure 3.
*2 To stop recording, press the [REC]
button at the end of measure 5.
Previously recorded data
Newly recorded data
Deleted data
3
53