Replacement Parts; Performance Data - Pentair EASY FLOW US1 Instruction Manual

REPLACEMENT PARTS

Item
Part Number
Number
1 OMF1S-R1S-S24
2 4007135
NOTE: Filter head is not available as a replacement part. Utilize
the 1 year product warranty or call Pentair Technical Support if
you are experiencing issues with the filter head.

PERFORMANCE DATA

Important Notice: Read performance data and compare the capabilities
of the system with your actual water treatment requirements. It is
recommended that the supply water be tested, before installing a water
treatment system, to determine your water treatment needs.
Test Conditions
Flow Rate ..................................................................1.25 GPM (4.73 L/min)
Filter Capacity
Capacity .................................................................5,000 gallons (18,927 L)
Inlet Pressure ...................................................................... 60 psi (4.1 bar)
Temperature ....................................................68°F +/- 5°F (20°C+/- 2.5°F)
Testing was performed under standard laboratory conditions, actual
performance may vary.
Operating Requirements for OMF1S (Easy Flow US1) Filtration System:
Pressure ............................................................40-100 psi (2.75–6.89 bar)
Temperature ............................................................40-100°F (4.4–37.8°C)
Quantity
Description
Required
Cartridge
1
OMF1S-CTO
Installation Kit 1
1
For replacement parts, call 800.279.9404
4
B
A
BR42887 4
OMF1S (EASY FLOW US1) FILTRATION
SYSTEM INSTALLED WITH OMF1S-CTO
FILTER CARTRIDGE
This system has been tested according to NSF/ANSI 42 and for reduction
of the substances listed below. The concentration of the indicated
substances in water entering the system was reduced to a concentration
less than or equal to the permissible limit for water exiting the system, as
specified in NSF/ANSI 42.
Model OMF1S
Substance
Standard 42
Chlorine Taste & Odor
Flow Rate = 1.25 gpm (4.73L/min); Capacity = 5,000 gallons (18,927 L)
Testing was performed under standard laboratory conditions, actual performance may vary.
The Model OMF1S is Tested and Certified by NSF International
against NSF/ANSI Standard 42 for the reduction of substances
specified on the Performance Data Sheet.
Easy Flow US1 Filtration System Instruction Manual • 7
3
3
Influent Challenge Reduction
Concentration Requirements
2.0 mg/L±10% ≥50%
2
2
2
Average
Reduction
62.6%