Table of Contents
Advertisement
Introduction
The warnings, cautions, and instruc
tions discussed in this manual cannot
cover all possible conditions and sit
uations which may occur. It must be
understood by the operator that com
mon sense and caution are factors
that cannot be built into this product,
but must be supplied by the operator.
Regulatory Statements
The EC Declaration of Conformity
(999-995-232.10) will accompany
this manual as a separate docu-
ment when required.
Directive 2014/53/EU
Radio
Bluetooth 4.0
Wi-Fi
802.11 b/g/n
Wi-Fi
802.11 a/n
GPS
This device complies with Part 15
of FCC rules. Operation is subject
to the following two conditions: (1)
This device may not cause harm-
ful interference, and (2) this device must ac-
cept any interference received, including in-
terference that may cause undesired
operation.
Contains Transmitter Module FCC ID: Z64-
WL18SBMOD.
UK lmporter
Ridge Tool UK (RIDGID)
44 Baker Street
London W1U 7AL, UK
Operating
Spectrum / Power
2402 – 2480 MHz
14.20 dBm
2400 – 2483.5 MHz
19.90 dBm
5150 – 5250 MHz
20.46 dBm
5250 – 5350 MHz
18.32 dBm
5470 – 5725 MHz
19.43 dBm
1559 – 1610 MHz
Safety Symbols
In this manual and on the product, safety
symbols and signal words are used to com-
municate important safety information. This
section is provided to improve understand-
ing of these signal words and symbols.
This is the safety alert symbol. It is
used to alert you to potential per-
sonal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
DANGER
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
CAUTION indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE indicates informa-
NOTICE
tion that relates to the pro-
tection of property.
This symbol means read the man-
ual carefully before using the
equipment. The manual contains
important information on the safe
and proper operation of the equip-
ment.
This symbol means always wear
safety glasses with side shields or
goggles when handling or using
this equipment to reduce the risk
of eye injury.
This symbol indicates the risk of
electrical shock.
CS12
– English – 3
x
Advertisement
Table of Contents
