Line Thickness - Ozobot COLOR CODE Manual

Guide
Draw Color Codes

Line Thickness

Line Color
Spacing
Safe Area
YES
Color Code square size:
• Best: 0.2" x 0.2" (5mm x 5mm)
• Range: 4.6mm — 6mm
Min: 0.18" (4.5mm)
Max: 0.24" (6mm)
Do not include space between Color Codes
with black lines before and after each Color
Code, except for the Line-End Color Code
(e.g., U-Turn, Win/Exit).
U-Turn
Win/Exit
Keep a minimum of 2" (51mm) between Color
Codes and 1" (25mm) from an intersection.
2" (51mm)
OZOBOT
Leave 0.5"
OZOB
(~12mm) of white OZOBO
OZOBOT
space on each
side of the line.
0.5" (~12mm)
5mm
5mm
No Color Codes
on corners
1"
(25mm)
OZOBOT
OZOB
OZOBO
OZOBOT
0.5" (~12mm)
Ozo Edu, Inc. •
NO
Squares should be approximately
the same size
Lines should be consistent in height
Codes should be in the same height
as the line
Black lines before and after each
Color Code only
Too dark
Squares should not have space in
between them
Squares should not overlap
Two-color codes need to be at the line end
Codes should be at least 2" (51mm) apart
Color Codes
should be at least
1" (25mm) from
intersections
Not enough white space on each side
of the line
• • Rev 2-23
ozobot.com support@ozobot.com 3