Ozobot EVO Manual

GET TO KNOW
1
EVO
Micro USB
charging port
1
IR Sensors
Color
sensor
3
POWER
3
ON/OFF
CLAIM
Claiming Evo(s) upon setup allows you to update Evo's firmware as needed. Use the following steps to claim
4
EVO
Evo from a Bluetooth™—enabled tablet or phone:
1. Make sure you have the most recent version of the Ozobot Evo companion app installed (v.1.1.89 or
4
newer on both iOS and Android).
2. Enable Bluetooth™ on your device and make sure Ozobot is turned on (if you have multiple Evos, make
sure the ones you are not claiming are powered off).
3. From the home page of the Evo Companion app, your Ozobot will show up in "Nearby Evo" at the bottom
of the screen.
4. Tap on the Evo you wish to claim and select "claim. "
5. Name Evo.
Front LED
Lights (5)
Top LED
Light
Power
button
Front
Line
sensors
Wheels
Back
Press and quickly release Evo's power button to turn on.
Evo will light up and begin interacting with you right away.
Press and quickly release the power button again to turn off.
GUIDE
CHARGE
2
2
Evo comes partially charged. Get a full charge for
maximum use.
1. Plug the USB Cable into Evo's Micro USB Port.
2. Plug the other end of the USB Cable into any
USB port or power adapter.
3. Evo's lights turn solid green
When a red light flashes on Evo's back side, it is
time to charge again.
when fully charged.
©2017 Evollve Inc.