Chapter 2 - Description Of Technical Details; Bernina Embroidery Module 830 Technical Specifications; Cleaning - Bernina 820 Service And Maintenance Manual

Chapter 2 – Description of technical details

2.1 BERNINA Embroidery module 830 technical specifications.

Features:
Dimensions ....................................................Y-Direction 632mm .................X-Direction 450mm
Oval hoop ......................................................Y-Direction 255mm .................X-Direction 145mm
Middle size hoop............................................Y-Direction 130mm .................X-Direction 100mm
Mega hoop.....................................................Y-Direction 400mm .................X-Direction 150mm
Jumbo hoop ...................................................924
Templates ......................................................Yes, all hoops have templates delivered with the device
Maximum embroidery speed .........................1000 S.p.m.
Average embroidery speed ...........................764 S.p.m.
Free arm capability ........................................Yes
Connectivity to the machine ..........................Direct (without cable)
Service data...................................................Yes via EEPROM
Service program for fault finding....................Yes
Belt tension adjustment X-Direction .............Yes via service program
Belt tension adjustment Y-Direction ..............Yes via service program
Weight (without packaging) ...........................6,2kg
Weight (with packaging) ................................ca. 11,3kg (depending on accessories)
Stepping motor increments X-Direction.........0.1mm
Stepping motor increments Y-Direction.........0.1mm
Embroidery with start/stop button ..................Yes
Embroidery with foot control unit ...................Yes
* Standard accessories:
Embroidery foot no. 26
Embroidery needle set
Embroidery hoops:
Oval
Middle
Small
1 x USB connecting cable
1 x BERNINA USB Stick
Template holder
Embroidery Software ART DESIGN
* Depending on the country.

2.2 Cleaning.

Remove covers and clean.
Electrostatic charging may occur during cleaning. To prevent this, use antistatic office-equipment cleaning
agents.
We use and recommend BASF's "SURFACE CLEAN" surface cleaner
It forms a protective film against static electricity, and is suitable for both plastic and metallic surfaces.
Inside parts
Dust, lint and thread remnants can accumulate inside the embroidery module and may lead to malfunctions.
The Y-carriage and the X-Carriage can be affected by the accumulation of dust, lint, and thread remnants, as
well as by belt residue.
BERNINA International AG · Seestrasse 161 · CH-8266 Steckborn · Switzerland
2
mm
Attention!
Never use alcohol,
petrol, spirits or any
corrosive fluids, or
abrasive pastes!
6