Cleaning After Use - Bissell Stain Pro 6 User Manual

O
perations

Cleaning after use

1. Unplug the unit.
2. Rinse collection tank thoroughly.
2a. Remove ReadyTools Dial by
rotating it halfway between "TOOLS" &
"FLOOR CLEANING."
2b. Pop out knob by using the opening
on the back of the tank. Rinse and replace
knob and collection tank.
3. Remove tank vent & foam filter (located
on top of the collection tank) and rinse.
4. Clean nozzle window by lifting latch
and removing from machine. Rinse
under running water.
5. When finished, replace nozzle and
secure with latch.
nOTE: For best results, it is
recommended that the nozzle
is cleaned after each use.
6. Remove lint and hair from red gasket in
base of unit. (Do not remove gasket)
7. Replace the collection tank to the base
of the machine and secure with latches.
10
w w w . b i s s e l l . c o m
2a.
2b.
3.
5.
2b.
4.
6.