Specifications - Milwaukee M18 FORCE LOGIC STSO Operator's Manual

• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is
•
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or
•
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
•
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range
instructions. Charging
temperatures outside the specified range may
damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
STRUT SHEARS
• Do not use tool without dies installed. Fingers
could be crushed.
• Keep hands away from clevis and dies while
tool is in use. Fingers could be crushed, fractured,
or amputated.
Always wear proper eye protection with side
•
shields, marked to comply with AS/NZS 1337.1
when operating the strut shear.
• Wear gloves when handling steel work pieces
to prevent possible injury from sharp edges.
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• Inspect and discard workpieces with cracks or
wear before use.
• Use tool only with MILWAUKEE
they are rated. Improper combinations can result
in a faulty shear.
• Large forces are generated during product use
that can break or throw parts and cause injury.
Stand clear during use and wear appropriate protec-
tive equipment, including eye protection.
Only use the strut shear head to
WARNING
cut material for which
dies are designed. Do not shear stainless steel.
Cutting improper material may damage the shear
head or result in serious personal injury.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
specified in the
improperly or
dies for which
®
the head/
•
Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
MILWAUKEE ®
additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
Some dust created by power sanding,
WARNING
sawing, grinding,
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
at
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
READ AND SAVE ALL INSTRUCTIONS FOR
ADDITIONAL BATTERY SAFETY RULES
T
WARNING
injury
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
WARNING
batteries.

SPECIFICATIONS

Cat. No. ................................................... M18 STSO
Volts .......................................................... 18 V DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Force .......................................................... 18 Tons
Cutting Cycle ..................................... 4.25 seconds
Max Capacity*:
Mild steel ............................... 2.6 mm (12Guage)
Chemically Treated Steel....... 2.6 mm (12Guage)
Recommended Ambient
Operating Temperature .................. -17°C to 51° C
*Do not shear stainless steel.
3
Tool or a trained professional for
service facility for a
®
drilling, and other
FUTURE USE
o reduce the risk of fire, personal
, and product damage due to
(0°F to 125°F)