Immobilisation/Stabilisation/Lifting - Hyundai IONIQ 5 N Emergency Response Manual

2. Immobilisation/Stabilisation/Lifting.

2.1 Immobilisation
The next step is to immobilise the vehicle to prevent any accidental movement that can endanger response personnel or
civilians. When the IONIQ 5 N EV is damaged in a crash, the vehicle may appear to be shut off when it is not due to no engine
sounds.
When the "READY" mode light is illuminated on the instrument panel, the vehicle can move silently using the electric motor.
Responders should approach the vehicle from the sides and stay away from the front or rear as they are potential paths for
vehicle movement. Be sure to immobilise the vehicle in the following manner.
Put the vehicle in P (Park)
position by pressing the 'P'
Put the vehicle in P (Park)
button on the rotary shifter
position by pressing the 'P'
button on the rotary shifter
2.2 Vehicle stabilisation
Use standard stabilisation (lift) points, as shown below. Always be sure to connect to a structural member of the vehicle and
avoid placing cribbing under high-voltage cables, and other areas not normally considered acceptable.
Engage Parking Brake
Engage Parking Brake
Chock the Wheels
Chock the Wheels
6