Table of Contents
Advertisement
Making/receiving calls
Calling with multiple participants
Consultation call
Holding another external call during an existing external call. The first call is placed on hold.
Ext. Call
Enter the number of the second participant . . . the current call is placed on
hold and the second participant is called
If the second participant does not answer:
End consultation call
Options
End Active Call
or
press the end call key
Call swapping
Talk to two callers one at a time (call swap). The other call is placed on hold.
During an external call, call a second participant (consultation call) or accept a waiting call . . .
the numbers or names of both call participants are shown on the display
To switch between the participants:
Ending a currently active call
Options
End Active Call
or:
Press the end call
Conference
Conducting a call with two participants simultaneously.
During an external call, dial a second participant (consultation call) or accept a waiting call . . .
Start conference call:
Confer. . . . all callers can hear one another and speak to one another
Switch back to call swapping:
End Conf. . . . You will be reconnected to the participant with whom the conference call was
started
End call with both participants:
Press the end call key
Each of the participants can end their participation in the conference call by pressing the end
call key
or hanging up.
22
End
OK . . . the connection with the first caller is reactivated
. . . the first participant is called again
Press the control key
OK . . . the active call is ended, the call on hold is activated
key . . . the first participant is called back
Advertisement
Table of Contents
