Gigaset R700H protect PRO Manual page 11

Charging the batteries
Charge the batteries fully prior to first use in the
charging cradle.
The batteries are fully charged when the power
icon disappears from the display.
Batteries can heat up during the charge process. This is not dangerous.
Over time, the charging capacity of the batteries will decrease for technical reasons.
Switch the handset off if you are not using it for a couple of days.
If you are not using the handset for a couple of weeks, switch it off and remove the
batteries.
Setting the display language
Press control key
OK
You can also change the display language later on in the Settings menu.
Registering the handset
Register the handset to a base/router.
Registration must be initiated both on the Gigaset N870 IP PRO and also on the
handset. To do this, the handset must be within range of the Gigaset N870 IP PRO.
On the Gigaset N870 IP PRO
Start registration procedure
Show information:
User guide "Gigaset N870 IP PRO - Installation, configuration and operation"
or: Please contact the administrator of the DECT network.
On the handset
You need the 4-digit system PIN (registration code) that was generated on the Gigaset N870 IP
PRO.
If the handset is not already registered to a base station:
Register . . . a search is carried out for a base that is ready for registration
PIN OK
Register the handset:
until the language required is selected on the display, e.g. Francais
Register Handset
ready for registration
(default setting for Gigaset bases: 0000)
Setting up the handset for use
OK . . . a search is carried out for a base that is
enter the system PIN if required
8.5 h
enter system
OK
11