Gigaset R700H protect PRO Manual page 17

Using the alarm function
The function key is used to manually start an alarm.
In idle status or when the screensaver is activated:
press function key . . . an alarm is triggered.
Alarm-Taste Trigger an action, e.g. alarm, flashing of the LEDs, calling a specific number.
Shorter and longer pressing of the alarm key can cause different functions to
be triggered.
The function can be used with an alarm system. For this, the base establishes
a connection to the alarm server. The connection details must be entered in
the configuration of the base. What is triggered by pressing the alarm button
depends on the configuration on the alarm server. The alarm system can also
trigger actions on the handset, such as sound an alarm and show symbols and
text on the display.
For information on the alarm system (AML):
Display keys
The display keys perform a range of functions depending on the operating situation.
Zurück Sichern
Press display key . . . function shown on display above is opened.
Torch
You can use your telephone as a torch. The spot LED is located on the top of the handset.
How to make an assignment to the display key is explained here:
Changing the assignment of the display keys.
Switch on the torch function
Press display key LED Torch.
or
Additional Features
Switch off the torch function
Press display key Off
or: after 2 minutes, the function is automatically switched off.
Current functions of
the display keys
Display keys
OK LED Torch OK
Getting to know your telephone
wiki.gigaset.com.
17