Assignment Of Tracks To 1/Right And 2/Left, And Voice Assignment - Yamaha Clavinova CVP-92 Owner's Manual

Song Playback
X
Select the desired track for playback
(PLAY/OFF, SOLO).
Select the track by using TRACK < or >, or the data dial, or the [–/
+] buttons.
➔ The selected track is indicated by an underline mark.
Select playback or off for the selected track by pressing one of the far
right LCD buttons PLAY (playback) or OFF.
When a track is muted, the track number box disappears and only the
number remains. The voice used by the currently selected track is shown
above PLAY/OFF.
Select a track, then press and highlight the SOLO LCD button to hear
only the selected track. Press the SOLO LCD button again to cancel the
Solo function.

Assignment of Tracks to 1/RIGHT and 2/LEFT, and Voice Assignment

I Assigning Tracks to 1/RIGHT and 2/LEFT
Specific tracks can be assigned to the 1/RIGHT and 2/LEFT in the
SONG PLAY [MAIN] display, allowing you to selectively turn playback
of assigned tracks on or off. TRACK - - (OFF) can be assigned to 2/
LEFT. The same track cannot be assigned to both parts.
Select the SONG PLAY [PART] display (display page 6) by using the
PAGE [<] [>] buttons.
➾ Press the 1/RIGHT or 2/LEFT button to highlight the section in
the display, then use the data dial or [–/+] buttons to assign the
desired track.
You can also select the track by pressing the 1/RIGHT or 2/LEFT
button.
80
.........................................................................................
............................
• The track assignments of DOC files
and Yamaha Disklavier PianoSoft files
are fixed, and therefore cannot be
changed.
• Tracks cannot be assigned during
playback.