Track Edit - Yamaha Clavinova CVP-92 Owner's Manual

Z
Enter the desired name.
Use the [>] button to move the underline cursor to the desired char-
acter position in the file name display. (File names can be up to 12 char-
acters in length).
➾ Use the data dial or [–/+] buttons to select and highlight the char-
acter or mark you wish to enter.
Press the CH.SET button to enter the selected character to the current
cursor position and move to the next position. Continue entering other
characters or marks in this way.
To delete the character at the previous position, press the BACK but-
ton. The character before the underline cursor is deleted and the cursor
moves back to the deleted position.
To abort the Song Name operation and return to the RECORD EDIT
display, press the CANCEL button.
X
Register the name.
When the song file name is complete, press the OK button to register
it. The new name is registered as the current song file name. To cancel
the operation, press the CANCEL button.
To exit from the Song Name function, press the [REC] button (the lamp
goes out).

Track Edit

Press the TRACK EDIT button in the RECORD [EDIT] display to
call up the TRACK EDIT display. There are three pages in the TRACK
EDIT display: TRACK EDIT [MIX], TRACK EDIT [DELETE], and
TRACK EDIT [QUANTIZE].
I Track Mix — Track Edit Page 1
The Track Mix function combines the data from two specified tracks
and copies the result to a third specified track.
............................................................................
..........................................................................................
Song Recording
Track Copy
• Only tracks containing data will appear
and can be selected for TRK A and
TRK B . In addition, "- - -" (no track)
can also be selected for TRK B . In this
case, the data of TRK A will simply be
copied to TRK C .
• For the Track Mix function, the se-
lected track voice and volume data,
etc. (i.e., all data except note data) of
TRK A will be effective for the track
after the mix operation.
109