Break; Stopping The Accompaniment Style - Yamaha Clavinova CVP-92 Owner's Manual

Starting/Stopping the Accompaniment Style

Break

When the Left Pedal function (page 119) is set to BREAK, you can
use the left pedal to trigger a break (silence) in the accompaniment for
dynamic effect.
Holding down the left pedal creates the break, and playback resumes
from the top of the next measure after the pedal is released.
To cancel the break, press the left pedal again during the break.

Stopping the accompaniment style

To stop style playback, press the [START/STOP] button.
To playback an ending pattern before stopping, press the [ENDING]
button.
Press [ENDING] a second time during playback to produce a
ritardando (gradually slowing) ending.
Different ending patterns are provided for the MAIN A and MAIN B
variations. (The [ENDING] lamp lights during ending playback). The
[MAIN A] lamp also lights when changing from the Main A pattern, and
the [MAIN B] lamp lights when entering from Main B.) The ending
begins from the top of the next measure if the [ENDING] button is
pressed on or after the second beat of a measure.
You can have the accompaniment fade out (gradually decrease in
volume to silence) and automatically stop by pressing the [FADE IN/
OUT] button. Then, it automatically sets to fade in stand-by (the lamp
lights) and stays in this condition for a few seconds before releasing.
[FADE IN/OUT] can be set to on no matter which pattern
([INTRO], [MAIN A], [MAIN B], [ENDING]) is selected.
ACMP ON
When the Left Pedal function (page 119) is set to START/STOP, you
can stop the style by using the left pedal.
44
AUTO ACCOMPANIMENT
AUTO FILL
VIRTUAL
ARRANGER INTRO MAIN B
MAIN A
FADE
ENDING IN/OUT TAP
START /STOP
SYNCHRO START/STOP