Cable Routing Set-Up - Yeti ASR Owner's Manual

CABLE ROUTING SET-UP

NON DRIVE CABLE ROUTING
01
REAR
BRAKE
REAR
DERAILLEUR
02
FRONT TRIANGLE - REAR TRIANGLE VIEW FROM BOTTOM
REAR
DERAILLEUR
REAR
BRAKE
DRIVE SIDE CABLE ROUTING
01
Route brake cable first through the nondrive side port in the rear tri, cable routing grommet, and
the top port in the headtube.
02
If applicable route the rear derailleur cable through the drive side rear triangle port, cable routing
grommet, and the bottom port in the headtube.
Cable routing is most easily done with the seat stay pivots assembled and the main pivot free to
allow the rear tri to swing away from the front triangle.
ASR | OWNER'S MANUAL
DROPPER
POST
CABLED
LOCKOUT
11