Table of Contents
Advertisement
—
MAINTENANCE
After ironing, while cool down and store;
(NI-WL6O/WL50)
"Sushie Gover)
(NI-WL40)
always keep the Steam Button in the Dry( 关 )
e
Case until it
Unplug iron, wait until iron cools
Self-cleaning
Ò
position; set the iron back to Power Base.
crn back in
completely.
@ Cleaning the steam chamber of Solepate
Push the Cover Case vertically until heard
@ Wipe off iron Soleplate and other part
and steam. vents with Jet of Steam, accord to
the sound clicks; then store the iron at safe
|
with a damp and soft cloth.
( How to use the Jet of Steam feature) (P14),
place.
er
V
er
id
pump the Jet of Steam Button Several times
D
N
"
or serious stain, use a neutral
detergent.
until steam is invisible.
€ You can restore the iron even it is hot.
HOW TO USE AS A DRY IRON
|
Pw
Remove stain powder
1. Remove the Cover Case same as step @ of " HOW TO USE AS A STEAM IRON ",
Move the Steam/Dry Selector to the Dry(X) position.
2. Set the iron on the Power Base securely, plug the AC Power Cord into electrical outlet;
Volatile detergent
connect to power supply.
3. According to (Temperature Select Indication ) push the Temperature Selected Button to
the desired position. Preheat the iron until the Indicator Light change from blink to illumination,
and start to iron.
4. After ironing, pullout Plug, set the iron back to Power Base. Push the Cover Case vertically until
until heard the sound clicks; then store the iron at safe place.
( please check
GENERALLY MALFUNCTION AND TACKLING METHOD
"in this table)
Steam/ Dry
|Jet of Steam Sind hold The way of | Temperature
Selector
Button
drainage
j
Repeat to pump the Spray Mist Button till it works.
The spray feature is particularly helpful for ironing thick materials
such as cotton, linen fabric.
Notes : 1. For heat-sensitive fabric, try to iron using a press cloth on top of fabric, otherwise it will ruin or damage.
2. Iron belended fabrics, setting temperature for lower-temperature fiber.
3. Iron clothes with worse heat resistance first while ironing the different kinds of cloth.
Fabric
|Temperature setting
Ironing recommendations
d
Connect}
Position is
i
well?
| correct?
|/Dry Selector
rature accord
(Contact with sales
un
ssing Button |to "MAIN- | theiron
indication or
agent if can't
position keep on| shouldbe
| TENANCE."|
cooling.
|use a press
AFTER SERVICE
For after service, if there are any questions, please inquiry to shop or telephone
800-810-0781
Get the warranty card from shop when purchases this product. Read
(D Warranty card
completely and store carefully, confirm the warranty card have been
( append )
recorded [ purchased date, name of the shop etc. ].
(2) Require repairing
Contact with service agent if can't deal according to above table.
Dealing metho
NYLON
SILK
POLYESTER
Dry iron on reverse side. To touch-up collars, cuffs,
RAYON
Med (中 )
pockets, etc., iron lightly on right side.
WOOL
Iron lightly on right side.
COTTON
High (=)
Steam ironing is suggested. iron dark fabrics on reverse
LINEN
Igh
irme
side to avoid unwanted sheen.
SPECIFICATION
Warranty period
According to the warranty card, provide the service agent with the electric
Rated voltage | 220V ^- 50Hz
Steam/Dry Iron
iron and warranty card and invoice.
NI-WL60/WL50:1600W: NI-WL40:1300W | Steam generations way | Drop
=
|
1
Exceed Warranty
:
:
~
Repair by service agent, it will be charged according to regulations.
Plug / Cords | Single-phase three pole plug/1.6m long
| Thermostat
Temperature range:"
低 "~" 高 " (120-205°C)
period
| Dimensions |29cmlong, 18cm width, 21cm height
| Iron surface
li60cm — — — — —
|
中 国 印刷 发行 ，2010 年 6 月
i82005-6N92B
(Restored) about 1.9kg, (Iron) about 1.0kg | Reservoir capacity — |120ml
©2010 松下 万宝 (广州 ) 电 屡 斗 有 限 公司 版 权 所 有 ， 未 经 许可 不 得 复制 和 散发 ， 否 则 违法 必 究 。
Temperature Select Indicator
© 2010 Panasonic Wanbao Home Appliances Electric Iron (Guangzhou) Co., Ltd. All Rights Reserved.
-15 -
-16 -
Dry iron on reverse side.
ACRYLIC
Dry iron on reverse side, or use a press cloth on
ACETATE
Low ( IR)
top of fabric.
Advertisement
Table of Contents
