User Settings; Single Trip Distance Clearance - HM Bike Pedelec Manual

" " logo showed in the upper column will disappear synchronously.
Please check
Error code display interface

. User Settings

In the information interface, press and hold the "PLUS" and "MINUS" button at the same time to
enter the setting interface. Short press the "CONFIRM" button in the setting menu to enter the sub
option. In the nal option menu, short-press the "con rm" key to con rm the current option. After
selecting the "Return" option, press the "CONFIRM" key to return to the previous menu. Long-press
the "CONFIRM" button in any setting menu to directly return to the main interface.
The setting interface is divided into four levels of sub options. For details of setting menu contents,
please refer to appendix 2 on page 23.

.1 Single trip distance clearance

Short-press the "MINUS" or "PLUS" button to switch to the "Reset trip" option. Select the "Yes" option,
and then short-press the "CONFIRM" button to clear the relevant data of singletrip.
Short press "CONFIRM" button on the "Return" option to return to the previous interface. Long-press
"CONFIRM" button to return to the main interface.
The default value is "No".
- 1 -
19