Usb Charging; Error Code - HM Bike Pedelec Manual

4.7

USB Charging

Plug in the device that needs charging when display is o . After turn on the display, the battery will
charge the device through the display, and the USB charging logo on the interface will
After the device that needs USB charging is plugged in at the power on state, long press the "PLUS"
button in the main interface to activate the USB charging function. If charging is in progress, the USB
charging logo on the display interface will light up.

Error Code

4.8
In the main interface, if there is an electrical fault in the E-bike electronic control system, the latest
fault code will be displayed in real time, and the red "
column.
When the E-bike
automatically. Only after the fault is eliminated, the fault code can be cleared. At the same time, the
USB Charging indicator
fault in electric control system, the display will show error code
" mark will be displayed in the upper
- 18 -
18
appear.