Note For Users; Normal Operation - HM Bike Pedelec Manual

3. Note for users

Be care of the safety use. Don't attempt to release the connector when battery is on
power.
Try to avoid hitting.
Don't split the waterproof sticker to avoid a ecting the waterproof performance
Don't modify system parameters to avoid parameters disorder.
Have the display repaired by a professional when error code appears.

4. Normal Operation

4.1
When the battery has output current, the display turns on. If the „Switch" button is long-pressed
the same time, and the system will be shut down. To turn it on again, long-press the „Switch" button
(for a couple of seconds).
When the battery has output current, and if the display has been turned on, press and hold the
display „Switch" button for 2 seconds, and the display will be closed. If the display is not turned
on, press and hold the display „Switch" button for 1 second to turn on the display.
If the system is not used for several minutes (the speci c time can be set in the instrument
parameter setting / automatic shutdown time setting item), the display will
automatically and the display dormant current is less than 6 mA.
If the system has not been used for 30 minutes, the battery and the whole system will turn o
automatically
After the display is powered on, the "ANANDA" start-up interface is displayed rst, and then
the main interface is entered.
When shutting down, the „ANANDA" shotdown interface will be
- 12 -
12
turn to sleep-mode