Battery Power Display - HM Bike Pedelec Manual

4.6 Battery Power display

In the main interface, the battery power display is refreshed in real time.
The battery content supports two display modes: progress battery power bar mode (in case of
successful communication between battery and display) and battery power grid mode (in case of
communication failure or no communication between battery and display). The display mode of
power progress bar is prior to the grid mode, and can be automatically switched according to the
communication status between battery and display. The power progress bar display mode shows the
real-time proportion of battery SOC content, and the grid mode displays the real-time power content
of current battery (0 ~ 5 grids). When the remaining power of the battery is less than 20%, it indicates
red, and ashes when it is less than 10%.
When the battery is su ciently charged, the current power status will be displayed in the green grid
or the percentage of green progress bar. When the battery is low power, the current state of battery
will be displayed in the red grid or the percentage of red progress bar, indicating that the battery is
under voltage and needs to be charged immediately.
With battery communication, the delay time from power on to normal showing of the display is 1
second; without battery communication, the delay time from power on to normal showing of the
display is 3 seconds; the display and battery communication interruption delay 5 seconds to switch to
the controller power , Switch to battery power immediately after communication resumes.
Battery grid mode Battery progress bar mode
- 17 -
17