Bresser Freek Vonk 9820202 Operating Instructions Manual page 29

EN
10. Charging the device
When the camera is low on power, it can be charged using the USB charging cable. A charger is not
included in the scope of delivery. It is recommended to use a charger in the range of 5V/500 mA to
5V/2A. A red indicator light on the camera turns on during charging and turns off when the device is fully
charged. It is recommended not to use the camera while it is charging.
NOTE: Always adjust the print density setting after charging.
11. Using the device as a memory card reader
You can use the device as a memory card reader by connecting it to a computer with a USB cable. Use
a USB data cable, not a charging cable. When the camera is connected to the computer, the contents of
the memory card can be copied, deleted, and viewed.
29