Securing The Battery - HBS Pegasar 500 accu Insulation Operating Manual

8.5

Securing the Battery

There are two locking options for securing the inserted battery in the
Pegasar 500 accu Insulation:
Battery in "work position"
Securing the battery for changing the place of work
Securing the battery for storage, shipment and long transport distances
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
8 Components of the Stud Welding Unit
The battery is inserted in the battery support
housing to the stop block. The locking clip is lo-
cked in place behind the battery. Electrical contact
is established between the stud welding unit and
the battery.
The battery is not completely inserted in the bat-
tery support housing. The locking clip is locked
in place in the groove on the battery. There is no
contact between the stud welding unit and the
battery.
For longer transport distances, shipment and sto-
rage with inserted battery, we recommend using
the transport protection.
27