FS-UVIR-975 Flame Simulator
FGD-PDS-FS-UVIR-975-Flame-Simulator
FS-UVIR-975
Flame Simulator for Rosemount
To be fully secure against fire, flame detector
self-testing is not enough. According to most
local jurisdictional authorities and as required for
SIL2 compliance, you need to test and ensure the
integrity of your entire flame detection system
at least once per year. That means performing a
full system loop test from the detector, through
the wiring to the controller, and up to the
actual alarm notification. The only way to do so,
without lighting a real fire, is with an external
flame simulator.
Complete End-to-End
Testing Using our Flame
Simulator
The FS-UVIR-975 Flame Simulator is the essential
complimentary tool to the self-testing capabilities of your
Rosemount
975UF Ultra Fast Ultraviolet Infrared and 975UR
™
Ultraviolet Infrared Flame Detectors. It brings fire prevention
safety to a higher level by giving you the ability to fully test the
operational readiness of your entire fire detection system:
Test the integrity of all the system components: all alarm
outputs, all cabling and connections and the fire alarm panel
functionality.
Test clear line of sight: By using the Rosemount Flame
Simulator, you will ensure that no object is obstructing the
field of view, and that the detector's window lens is not
obscured.
Therefore, by simulating a fire that actually triggers the detector
outputs, the model FS-UVIR-975 verifies the correct operation
of the Rosemount 975UF Ultra Fast Ultraviolet Infrared and
975UR Ultraviolet Infrared Flame detectors, performs an
essential end-to-end loop test and verifies window cleanliness.
975UF and 975UR
™
Rosemount
The robust and reliable FS-UVIR-975 Flame Simulator allows
remote testing of flame detectors, which are often located in
difficult to access and/or classified hazardous areas
(Zones 1 & 2).
Features & Benefits
Long-range flame detector activation – at a range up
to 20 ft (6 m)
Reduced maintenance costs with easy access for testing
detectors, in hard to reach places, from floor/deck level
without the need for scaffolding or ladders
Highly portable – for hand held operation by a single
operator
Easy aiming using laser diode
ATEX/IECEx approved for use in Zones 1 & 2 hazardous areas
Single charge is sufficient to test up to 100 detectors
Product Data Sheet
July 2016
Flame Simulator
™