Operating the System
SEGA MASTER SYSTEM II
POWER BASE
Pause Button
Power Switch _
CONTROL PAD
Directional Button ~
Button |
Button 2 ~
. Plug a Sega Master System II
Control Pad into Control Port 1 on
the Power Base. For two players,
plug a second Sega Master System
II Control Pad (sold separately)
into Control Port 2.
. Turn the power switch off.
. When you are using a Cartridge,
insert it, label facing forward, into
the cartridge slot. Press it fully into
the slot.
. Turn the power switch on.
. If all connections have been
properly made, the Sega logo will
appear, followed by the title screen
and, in some cases, a
demonstration of the game.
_~ Game Cartridge
_ Cartridge Slot Cover
6. To pause during play, press the
Pause Button on the Power Base.
To resume action, press it again.
NOTE:
¢ All of the previously released
Master System cartridges (except for
the Sega Card Games) can be used
with the Sega Master System II.
The 3-D adaptor unit cannot be used
with the Sega Master System II.
Therefore, 3-D games cannot be
played with this system.
ALEX KIDD in Miracle World™ is
built in this system. There is no need
to insert a cartridge. You can
immediately start playing the game
by simply turning on the Power
Switch.
Io-rozm
Need help?
Do you have a question about the Master System II and is the answer not in the manual?