Sylvania SRDV495 Owner's Manual page 100

Others
Remote control
The remote control does not function.
7
Others
The unit does not operate properly. • When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you • It may take a few seconds for the disc tray to open after you
press OPEN/CLOSE __ button, have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
"Repairing" appears on the display.
J
Batteries are weal<.
There are obstacles between the remote control and the unit.
The remote control is far from the unit.
There are no batteries in the remote control.
Turn on the unit.
The remote control is not pointed at the remote sensor on the
unit.
Press the DVD orVCR button, whichever" you need.Then, try
again.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
[ Disc Error J
-- Please eiect the disc. -- Unplayable disc is inserted
in the unit.
Playback feature may not be
available on this Disc.
Insert the standardized disc which
bear the marks on page 34.
L Region Error J
-- PLease eiect the disc. --
Playback is not authorized
in your
region,
L
Parental Loci< On J
-- Please eiect the disc. --
The currentselected
parental [eve[
Prohibits p[D, back.
Playback is not authorized
because the region code of the
DVD video disc you inserted is
different.
The current selected parental
Level in the SETUP Menu
prohibits playback.
Insert the DVD-Video disc with
region codes 1 orALk
Check the "Parental Loci<" setting
(pages 32-33),
L Recording Error J
This program is not a[Iowed
to be recorded,
The recording function encountered You cannot record copy prohibited
the cop>" prohibited program, programs.
L
Recording Error J
This program is not
recordabIe in Video mode.
You are trying to record copyonce
program onto the DVD-RVV disc
inVideo mode or" the DVD disc.
Set "DVD-RW Recording Format"
to "VR mode" (page 58).
L
Recording Error J
Can not record on this disc.
You are trying to record onto disc
which is unrecordabie, or the
disc status prevents recordin&
hsert the recordable disc, and
ensure the disc status satisfies the
recording requirements
(pages 56-72).
I
Recording Error
I
This program is not allowed to
be recorded on this disc.
You are trying to record the copy-
once program onto a DVD-R_
disc which is not compatible with
CPRM.
Insert a ven 1.1 CPRH compatible
DVD-R_A7 disc (page 57).
I
Recording Error
I
This disc is protected and not
recordabJe.
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 72).
100