Advertisement
3 WORK
3.11
3.12
3.13
26
Removing the seat
V00342-10
Mounting the seat
V00343-10
V00342-10
Removing the battery
Warning
Environmental hazard Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Dispose of batteries at a collection point for used batteries.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
–
Remove screws
1
.
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
(EXC‑F EU/AU/BR, All Six Days models)
–
Press and hold the kill switch
until the engine stops.
1
.
M6
10 Nm (7.4 lbf ft)
while the engine is idling
Advertisement
