Krups EA816170R Instructions Manual page 27

Preparing the grinder
You can adjust the strength of your coffee by adjusting how finely the coffee beans are ground.
Generally, the finer the coffee is ground, the stronger and creamier the coffee will be, but this also depends on the
type of coffee used.
Adjust the fineness of grinding by turning the coffee grounds fineness adjustment knob
coffee bean container. It is advised that you do this during grinding, one notch at a time.
After 3 rounds, you will notice a pronounced difference in taste. To the left, the grounds are finer. To the right, the
grounds are courser. (7)
Claris F 088 - Aqua Filter System cartridge (Sold separately)
To optimise the taste of your drinks and the lifespan of your appliance, you are advised to only use a Claris - Aqua
Filter System cartridge with your machine (see the chapter OTHER FUNCTIONS – Installing the filter).
Every time you place a Claris-Aqua Filter into the machine you must prime the filter before using the machine by
activating the "install filter cartridge" program.
MAKING AN ESPRESSO AND A COFFEE
Note :
The amount of water for making an espresso is between 30 and 70 ml.
The amount of water for making a coffee is between 80 and 180 ml.
Starting preparation (with 1 or 2 cups)
■ Press the on-off button
■ The coffee types menu is displayed. The function indicator
■ Place one or two cups under the coffee jets. You can lower or raise the coffee jets according to the size of your cup
(8). Select the coffee strength (shown coffee beans displayed on the screen in brackets) with the + button to
increase or the - button to decrease.
■ Press the navigation button
brackets using the + or - buttons
■ Press the navigation button
brackets using the + or - buttons
■ Press the START button
■ You can set the water volume at any time using the + or - buttons
■ To stop the flow into your cup, press the STOP button
■ You can also adjust the temperature of your coffee (see the chapter OTHER functions - Settings).
Two cup function
The appliance will automatically carry out 2 full cycles of coffee preparation.
MAKING DRINKS USING STEAM
Steam is used to froth the milk, for example when preparing a cappuccino or caffe latte, and also to heat up liquids.
As a higher temperature is required when producing steam than when making an espresso, the appliance will launch
an additional pre-heating phase.
Frothing milk
■ For best results, you are advised to use very fresh, very cold pasteurised or UHT milk, recently opened. Unpasteurised
milk does not produce the best results.
■ Check that the steam nozzle is correctly positioned.
■ Pour the milk into a milk jug which has a handle or into a cappuccino cup. Only fill it half way.
■ When the screen displays the drink selection menu, press the steam button
located above the steam button
■ Insert the steam nozzle into the milk.
24
, and wait for the appliance to finish heating up.
(9).
to set the volume: select the volume of water displayed on the screen between
(10).
to set the number of cups: select 1 or 2 cups, displayed on the screen between
.
(11).
.
is shown above the coffee types button
.
.
which is located in the
(12). The function indicator
(6).
is