Cub Cadet 7530 Operator's Manual page 67

Upper Link
UPPER UPPER
LINK LINK
HOOK HOOK
IMPORTANT: After the upper link is correctly adjusted, make sure the
lock nut is tightened against the turnbuckle.
Stabilizer
SLIDER PLATE
The length A of the upper link can be
adjusted from 470 to 750 mm (18.5 to
29.5 inches).
Turn the turnbuckle clockwise to
TURNBUCKLE TURNBUCKLE
shorten the link or counterclockwise
to lengthen the link.
LOCK NUT
When side movement of the hitch is
undesirable or hazardous, the lateral
swing is adjusted by select hole on
the stabilizer.
Slide REAR STABILIZER and adjust
LOCK PIN
hole REAR and FRONT STABILIZER
set clevis pin the hole.
IMPORTANT: After making final
adjustments carefully raise the
implement to make sure that there is
p r o p e r c l e a r a n c e b e t w e e n t h e
implement and tractor components.
NOTE: Insert pin to hole in clevis pin
surely.
59
FIELD OPERATION