Transmission Operation - Cub Cadet 7530 Operator's Manual

GEAR DRIVE TRANSMISSION
The gear drive transmission has forward and a reverse gear section,
a four-speed main shift gear section, and a three-speed range section.
This arrangement gives 8 forward and 8 reverse speeds.

Transmission Operation

1. Push the clutch pedal and stop the tractor. Move the gear shift lever to
the gear needed.
2. Move the range shift lever to the position needed, H, L (The tractor
must be stopped before the range lever is operated.)
3. Move the shuttle lever to Forward or Reverse position.
4. Release the clutch pedal slowly.
NOTE: When shifting from fourth to another range, be careful not to run
the engine at more than 2700 RPM.
IMPORTANT: Before selecting a new range, push the clutch pedal halfway
and stop the tractor. Do not change range when the tractor is moving.
OPERATING INSTRUCTION
46