Air Intake System; Power Train - Cub Cadet 7530 Operator's Manual

Air Intake System

Type
Cooling System
Type
Radiator
Thermostat
Pressure Cap
Water Temperature
Tractor Brakes
Type
Operation
Parking Brakes
Transmission
Type
Gear Drive
Hydrostatic Drive
Gear Selection
Gear Drive
Hydrostatic Drive
Shift Control
Gear Drive
Hydrostatic Drive
Oil Cooler
Dry Type Air Cleaning System
with 2nd Filter
Pressure System, Thermostat
Controlled Bypass, Impeller Type Pump
Corrugated and Wave Fin Type
Start to Open at Approx.82 C (180 F)
Fully Open at 95 C (203 F)
Thermometer on Instrument Panel

POWER TRAIN

S y n c h ro m e s h o n s h ut t le s h if t
(forward-reverse section) and main
Gear Shift of constant mesh with
two Ranges of Selective Sliding Gears
Hydrostatic Transmission with Three
Ranges of Selective Sliding Gears
8 Speeds Forward and 8 Speeds Reverse
3 Speed ranges in Forward and Reverse
with Variable Speeds.
Actuated by Two Shift Levers on the LH
Fender and shuttle lever on the column.
Actuated by Pedal on the RH Step and
lever on the LH Fender
15
SPECIFICATIONS
88.3kPa (12.8PSI)
Wet Disk Plate Type
Mechanical
Hand Operating Lock Type
Hydrostatic Drive only