Technical Data; Spoke Tension; Tolerances - DT SWISS CLASSIC Technical Manual

6. TECHNICAL DATA

Further technical data, such as spoke types, spoke lengths etc., can be found in the Product Support Tool at
www.dtswiss.com.
Technical data of products from older model years can also be found in the DT Swiss Techbook.

6.1 SPOKE TENSION

Wheel type
Disc Brake Front wheel
Alu
Rear wheel

6.2 TOLERANCES

Wheel type
Aluminum welded
Aluminum sleeved
24
max. permissible
spoke tension of the
higher tensioned
wheel side
[N]
1 200
1 300
Lateral runout [mm]
0.3
0.4
min. permissible
spoke tension of the
higher tensioned
wheel side
[N]
950
1 050
Radial runout [mm]
0.3
0.4
average spoke
tension of the higher
tensioned wheel side
[N]
1150 - 1000
1250 - 1100
Dish [mm]
0.3
0.4