[ENGLISH]
Advanced Recording
• REC LAMP
+ The REC LAMP function works in CAMERA mode only.
+ You can turn the REC indicator on or off during recording.
1.
2,
3.
4.
Set the camcorder to CAMERA mode.
Press the MENU ON/OFF button.
•
The menu list will appear.
Turn the MENU DIAL to highlight REC LAMP.
To turn the REC lamp indicator ON or OFF during recording, press the ENTER button.
•
The REC LAMP menu is changed to ON or OFF respectively.
•
If you want to turn off the indicator, set the REC LAMP to OFF,
5. To exit, press the MENU ON/OFF button.
(MENU}
SP STBY
DSESELECT--OFF
WBALANCE---AUTO
SHUTFER ........
AUTO
IRIS .............
AUTO
REC MODE ........
SP
_MENU
/MENU)
SP STBY
DSESELECT---OFF
W BALANCE---AUT©
SHUTTER .........
AUT©
IRIS .............
AUTO
RECMODE
.......
SP
_MENU
• WIND CUT
+ The WIND CUT function works in CAMERA mode only.
+ The WIND CUT function minimizes wind noise or other noise during recording.
- When the wind cut is on, some low sounds are cut out along with the sound of the wind.
+ The WIND CUT menu selecting method is the same as the REC LAME