Ford F-150 POLICE RESPONDER 2022 Supplemental Owner's Manual page 118

1
2
E363809
E363808
1. Extension Block
2. Wing bolt
1. Place the vehicle jack at the jacking
point next to the tire you are changing.
2. When jacking the vehicle to service a
front wheel/tire, remove the wing bolt
holding the extension block to the jack
stowage bracket and reuse wing bolt
to attach extension block to jacking
surface.
Note: If servicing a rear tire position, the
extension block is not needed.
3. Reassemble the jack handle, including
the S-hook, to the lug wrench. Insert
the S-hook into the eyelet of the jack
and turn the jack handle clockwise until
the wheel is completely off the ground.
2022 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Changing a Road Wheel
1
2
115
4. Remove the wheel nuts with the lug
wrench.
5. Replace the flat tire with the spare tire,
making sure the valve stem is facing
outward. Reinstall the wheel nuts until
the wheel is snug against the hub. Do
not fully tighten the wheel nuts until
you lower the wheel.
6. Lower the wheel by turning the jack
handle counterclockwise.
7. Remove the vehicle jack and fully
tighten the wheel nuts in the order
shown.
8. Stow the flat tire.
9. Stow the vehicle jack and lug wrench.
Make sure the jack is securely fastened
before you drive.
10. Unblock the wheels.
E166719
Stowing the Flat or Spare Tire
Note: Failure to follow the spare tire
stowage instructions could result in failure
of the cable or loss of the spare tire.
1. Lay the tire on the ground with the
valve stem facing up.
2. Slide the wheel partially under the
vehicle and install the retainer through
the wheel center. Pull on the cable to
align the components at the end of the
cable.