Oster BVSTEM7200 Instruction Manual page 21

MAX
MAX
ESPRESSO MAKING GUIDE
9. Start Frothing Milk
12
12
O'CLOCK
O'CLOCK
3
3
O'CLOCK
O'CLOCK
Insert Steam Wand Steam Wand position:
Tip just below the - Arm at 12 o'clock.
surface of the milk. - Tip at 3 o'clock.
10. Milk Frothing
As milk level rises, When desired
lower Pitcher to microfoam achieved,
keep Tip just below immerse Steam Wand
surface. half way.
11. Milk Finishing Touches
Tap Pitcher to Swirl Pitcher to blend
release milk and create a
larger air bubbles. silky texture.
Slimline Coffeemaker_BVSTEM7200_22SEPM4 (LA).indd 10-11 Slimline Coffeemaker_BVSTEM7200_22SEPM4 (LA).indd 10-11
Turn DIAL to Frothing makes Check milk is
STEAM position to a smooth hissing moving in a
start frothing milk. noise. whirlpool action.
60-65°C
60-65°C
Milk is ready when it Return DIAL to OFF Remove pitcher from
reaches the desired position. the steam wand and
foam and temperature take thermometer out
of 60-65°C or when of the pitcher.
the pitcher is too hot
to touch for 3 seconds.
Pour milk in one
steady stream.
English-10
RETURN
ESPRESSO MAKING GUIDE
12 . Purge and Clean Steam Wand
Put the steam wand Milky water will Return DIAL to the
pointing to the dip tray. come out of OFF position.
Turn DIAL to HOT Steam Wand.
WATER for 1-2 secs.
13. Making a second coffee after texturing milk
Important: To make coffee again immediately after texturing milk,
the thermoblock must first be cooled by following these steps:
Turn the dial to the (hot water icon), steam will come
Press the 2 cup Place a cup under
out. When you see a stream of water coming out after
button the steam wand.
30-40 seconds, turn the dial to the OFF position.
Your machine is now ready to make the next coffee.
14. Cleaning Up
REMOVE
TURN
TURN
Turn Portafilter and remove from Remove espresso
Group Head. puck from Portafilter.
English-11
Pro Tip:
RETURN
RETURN
To keep optimum
Steam Wand
performance,
always purge
and clean the
Steam Wand after
frothing milk.
Wipe Steam Wand
and Tip with a damp
cloth.
BANG
REMOVE
Check if the Drip Tray Wash parts with
needs emptying. warm water.
2022/12/13 9:33 AM 2022/12/13 9:33 AM