Filling When In Use; Removing The Mixer; Useful Tips - Silvercrest SSM 550 B1 Operating Instructions Manual

Filling when in use

Warning!
Should you wish to insert further foodstuffs during
operation, you may ONLY open the filling cap
provided for this purpose.
• Under no circumstance should you open the lid
w
. Pieces of the foodstuff could be thrown out at
high speeds!
• Do not insert cutlery items or mixing tools into
e
the mixing jug when the appliance is in use.
There is a considerable risk of injury should these
make contact with the swiftly rotating cutters
To insert something when the appliance is in
operation, ...
➩
q
turn the filling cap
it.
➩
Fill in the ingredients.
➩
Afterwards, replace the filling cap
lid and secure it by turning it clockwise.

Removing the mixer

When the processing of the foodstuffs is complete:
➩
Always first place the switch
position ("0") and remove the power plug.
➩
Wait until the motor has come to a complete
standstill before lifting the mixer jug
up. It does not need to be turned.
anti-clockwise and remove
q
into the
t
into the OFF
e
straight

Useful tips

– The best results when blending firm ingredients
are achieved by placing small portions one after
q
the other into the mixer jug
ting a single large portion.
– When processing firm ingredients, cut them into
small pieces (2-3 cm).
– When mixing liquid ingredients begin first of all
with a small measure of fluids. Gradually add
more fluids to the mixture through the filling cap.
– The appliance can be stabilised by placing your
r
! hand on top of the closed liquidiser during opera-
tion.
– For the stirring of firm or very viscous foodstuffs
it can be beneficial to use the impulse-operation,
which helps avoid a blocking of the cutters
Notice
Do not use the appliance to crush grains of cooking
salt, refined sugar or white sugar. For example, to
make powdered sugar.
- 5 -
e
instead of inser-
r
.