Data File Format - BRECHTEL mini-OPC 9405 Instrument Manual

7.4 Data Files

Data File Format

The header of each data file is defined by the lines with the "#" character as follows
(descriptions in () do not appear in the file):
#OPC Serial Number:98 (serial number of the unit)
#firmware:3.1 (version of the firmware installed on the EEPROM)
#mfg_date:6/16/32 (manufacture date, MM,DD,YY)
# (blank line)
#sample_c2=-1274.3 (sample LFE quadratic cal coef)
#sample_c1=259.7 (sample LFE linear cal coef)
#sample_c0=-33.3 (sample LFE constant cal coef)
#sheath_c2=-5998.1 (sheath LFE quadratic cal coef)
#sheath_c1=1375.7 (sheath LFE linear cal coef)
#sheath_c0=-203.3 (sheath LFE constant cal coef)
#cal_temp=25.0 (temperature during LFE calibration, deg C)
#press_slop=3696.5 (pressure linear slope cal coef)
#press_offs=-143.1 (pressure constant cal coef)
# (blank line)
#pmt_cal=2400 (baseline calibration for PMT)
#pmt_gain_pot=37 (PMT gain setting)
#lsr_brt_pot=110 (Laser brightness pot setting)
#lsr_gain_pot=127 (Laser gain pot setting)
# (blank line)
#cal_hg1=170,460 (high gain size cal, point 1 of 20)
#cal_hg2=180,568
#cal_hg3=190,760
#cal_hg4=200,1032
#cal_hg5=210,1392
#cal_hg6=220,1792
#cal_hg7=250,4096
#cal_hg8=260,4704
#cal_hg9=280,5760
#cal_hg10=310,6784
83-00032-01 mini-OPC 9405 Page 25 of 39