Opc Settings Menu; Serial Com Menu; Bin Limits Menu; Calibration Menu - BRECHTEL mini-OPC 9405 Instrument Manual

7.3 Front Panel & Firmware

OPC SETTINGS Menu

opc_cntl: (mini-OPC Control: Off, On)
samp_intrvl: (averaging interval: 1-60 seconds)
samp_rh: (is RH sensor installed)

SERIAL COM Menu

com_type: (USB, RS232 [115.2K])
auto_rpt: (auto report: Off, On)
delimiter: (data delimiter: <CR>, TAB, SPACE)
rpt_label: (report labels: Off, On)

BIN LIMITS Menu

This menu allows users to scroll through the bin numbers (1-72) to see the bin limits for
each bin shown in nanometers. Users can also see the A/D ranges as well.

CALIBRATION Menu

sample_c2: (sample flow x2 coefficient)
sample_c1: (sample flow x coefficient)
sample_c0: (sample flow offset coefficient)
sheath_c2: (sheath flow x2 coefficient)
sheath_c1: (sheath flow x coefficient)
sheath_c0: (sheath flow offset coefficient)
cal_temp: (temperature during calibration)
press_slop: (slope for pressure reading)
press_offs: (offset for pressure reading)
pmt_base_cal: (setpoint for PMT base control)

RAW READINGS Menu

sample_raw: (raw sample LFE flow reading (0-4095) )
sheath_raw: (raw sheath LFE flow reading (0-4095) )
83-00032-01 mini-OPC 9405 Page 22 of 39