Table of Contents
Advertisement
7.3 Front Panel & Firmware
OPC CONTROL Menu
Push data knob to move cursor under On/Off on the first line. Rotate data knob to control
OPC on/off.
Samp: measured sample flow / sample setpoint exit pump power (0-200)
Shth: measured sheath flow / sheath setpoint sheath pump power (0-200)
Temp: temperature (deg C)
Pres: pressure (mbar)
PULSE READINGS Menu
The Display menu displays all mini-OPC readings, the data knob is used to select the
readings to display. The following readings are available:
Conc:XX.X (Concentration #/CC)
Ave Conc:XX.X (30 second running average)
Cnts:NNN (counts per second)
LASER READINGS Menu
Brightness: (0-4095)
Current: (0-4095)
TIME & DATE Menu
The current date and time of the mini-OPC is displayed. Use short knob presses to move
the cursor to adjust the time and date if required. If the UAV Reader software is used as
the user interface, then each time the software connects with the mini-OPC the date and
time of the unit is reset to the current date and time of the Windows PC running the UAV
Reader software.
In "DEFAULT SETTINGS" mode there are six available menus:
83-00032-01
mini-OPC 9405
Page 21 of 39
Advertisement
Table of Contents
