Furuno 1751 Operator's Manual page 64

Scanner Unit Installation
6 INSTALUTtON
[For Alternative Mountingj
When the scanner unit is reversely mounted, the magnet must be relocated, otherwise the
radar screen aiways shows the stem view!!
Figure 6-8 Place oT Magnet
1. Open the scanner housing cover and fix the stay. Turn the antenna radiator by hånd until
the magnet is in sight.
2. Remove the magnet from the bearing retamcr by loosening the M3 screw.
3. Turn the antenna radiator 180° by hånd, and you should see the other place for fixing the
magnet on the bearing retainer.
4. Fix the magnet removed in step (!) to the [dace.
6-7