Pioneer PDR-05 Operating Instructions Manual page 45

Compact disc recorder
Table of Contents

Advertisement

CHARACTER MESSAGE LIST
If no key or control has been
pressed
for about
3 minutes
after the
demonstration was stopped, it will start again.
The demonstration mode can be initiated by press POWER button and the track
search button (__&<3~_) within 1 second after turning on the power.
To cancei the demonstration
mode, press the POWER
button in the power
standby mode then immediately press the track search button (eee) .
(The demonstration will not restart in about 3 minutes later.)
Message
Description
Ref. Page
OPEN
The tray is being opened.
p. 42
CLOSE
The tray is being closed.
p. 42
T
"SET® "UP"
The unit is performing initial set-up for recording. Please wait a while.
"TOC" "READ"
The unit is reading the TOC of the disc. Please wait a while.
1-SYNC
The unit is standing by for 1-track automatic digital recording. The recording will
p. 48
start in synchronism with the start of the player.
AL-SYNC
The unit is standing by for all-track automatic digital recording. The recording will
p. 50
start in synchronism with the start of the player.
+
If you want to finalize it, press the FINALIZE button.
=)
MON
The unit is monitoring the input selected with the input selector.
p. 46
"INPUT" "CD"
The unit displays the source it is monitoring (for CD, MD, DAT, and DCC).
p. 46
(MD, DAT, DCC)
ener
eee
Select a track with the numeric buttons or Hé<¢ (or BR) button.
"SKIP" "SET?"
The current operation is the track skip setting operation.
p. 82
lf you want to skip a track, select it with the SKIP ID SET button.
"SKIP" "CLEAR?"
The current operation is the track skip clear operation.
p. 86
If you want to clear the skip designation of a track, select it with the SKIP 1D SET
button.
"PIONEER"
The current operation is the store-front demonstration.
"CD-R"
The demonstration stops when any key or control is operated.
in addition to above, other character messages are also displayed as the unit detects troubles during use.
For other character messages than above, refer to "Self-diagnostics function" on page 106.
98
<PRE1216>
En

Advertisement

Table of Contents
loading

Table of Contents