Download Print this page
Braun BC06-DCF Quick Setup Manual
Braun BC06-DCF Quick Setup Manual

Braun BC06-DCF Quick Setup Manual

Wall clock
Hide thumbs Also See for BC06-DCF:

Advertisement

Available languages

Available languages

Quick Links

BC06-DCF
Wall clock
(Radio controlled)
Quick set-up guide
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
1
Battery installation
Insert 1x AA (1.5V) battery observing the
correct polarity, as shown on the diagram (
Only use new alkaline batteries from a
reputable brand.
Radio controlled clock operation
We strongly recommend you start your clock
at night. Once the battery is installed properly,
the clock automatically sets itself to 12 o'clock
and then begins receiving the signal. Once it
has received the DCF signal and processed
it accordingly (which takes 3 to maximum 12
minutes), the clock will automatically display
the correct time.
Manual time setting
Manual time setting
1. Press and hold the TIME SET button (
1. Press and hold the TIME SET button (
for 3 - 4 seconds to enter the time setting.
for 3 - 4 seconds to enter the time setting.
2. Press the TIME SET button for 1 second to
2. Press the TIME SET button for 1 second to
advance 1 minute, or
advance 1 minute, or
3. Press and hold the TIME SET button for more
3. Press and hold the TIME SET button for more
than 2 seconds to speed up the time setting to
than 2 seconds to speed up the time setting to
the desired time.
the desired time.
4. If the TIME SET button is not pressed for 8
4. If the TIME SET button is not pressed for 8
seconds, the clock is set.
seconds, the clock is set.
Reset function
Reset function
The clock has a hands setting help function.
The clock has a hands setting help function.
By pressing the reset button (
By pressing the reset button (
hands will automatically move to the 12 o'clock
hands will automatically move to the 12 o'clock
position and then receive signal.
position and then receive signal.
2
3
).
1
)
)
2
) at any time, the
) at any time, the
3

Advertisement

loading

Summary of Contents for Braun BC06-DCF

  • Page 1 Battery installation Insert 1x AA (1.5V) battery observing the correct polarity, as shown on the diagram ( BC06-DCF Only use new alkaline batteries from a Wall clock reputable brand. (Radio controlled) Radio controlled clock operation We strongly recommend you start your clock at night.
  • Page 2 Einlegen der Batterie Legen Sie 1x AA (1,5 V) Batterie ein und achten Sie dabei auf die richtige Polarität (siehe Abbildung: BC06-DCF Verwenden Sie nur neue Alkali-Batterien von anerkannten Marken. Wanduhr (Funkgesteuert) Betrieb des Funkweckers Wir empfehlen Ihnen, Ihre Uhr nachts zu starten.