Braun BC15 Quick Setup Manual

BC15
Projection clock
Quick set-up guide
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
1 2 3
Option A: Battery operated
1. Remove the battery door.
2. Insert 3xAA size new batteries as indicated in the
battery compartment (
( ) to reset the clock. The display will turn on after
5
a few seconds.
3. Close the battery door.
Only use new alkaline batteries from a reputable
brand.
Option B: Adaptor operated
1. Plug the adaptor into the DC jack (
of the clock, and press the 'reset' key (
the clock. The display will turn on after a few
seconds.
Setting the time
1. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch ( ) to the TIME SETTING position.
2
2. Press the '+' or '-' key (
3. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch to the NEUTRAL position to return
the normal display and save the settings.
Setting the alarm
1. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch ( ) to the ALARM SETTING
2
position.
2. Press the '+' or '-' key (
3. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch to the NEUTRAL position to return
the normal display and save the settings.
Using the alarm and snooze function
1. Enable the alarm by shifting the ALARM ON / OFF
slider ( ) up (so the green detail is visible). The bell
4
3
icon will appear on the LCD display.
2. Tap the SNOOZE / LIGHT touch button (
5
stop the alarm and activate the snooze function.
When the snooze function is activated, the bell icon
will flash.
3. To disable the alarm and snooze function, shift
the ALARM ON / OFF slider down. The bell icon will
6
disappear.
7
), and press the 'reset' key
7
) at the back
6
) to reset
5
) to set the desired value.
4
) to set the desired value.
4
) to
1