National Instruments PXIe-5696 Getting Started page 8

Figure 2. Chassis Compatibility Symbols
a. PXI Express System Controller Slot
b. PXI Peripheral Slot
c. PXI Express Hybrid Peripheral Slot
d. PXI Express System Timing Slot
e. PXI Express Peripheral Slot
NI 5696 modules can be placed in PXI Express peripheral slots, PXI Express
hybrid peripheral slots, or PXI Express system timing slots.
6. Touch any metal part of the chassis to discharge static electricity.
7. Ensure that the ejector handle is in the downward (unlatched) position.
8. Place the module edges into the module guides at the top and bottom of the
chassis. Slide the module into the slot until it is fully inserted.
Figure 1. Module Installation
2
3
a. Chassis
b. Hardware Module
c. Ejector Handle in Downward (Unlatched) Position
9. Latch the module in place by pulling up on the ejector handle.
8
ni.com
PXIe-5696 Getting Started