Figure 3.1A
Attic Fan
3.2
FAN HUB LED INDICATORS
POWER INDICATOR
The Power LED
•
indicator will always
be lit when the Hub
is connected to
Power.
If this LED is not lit,
•
check the power
source.
TIMER INDICATOR
The Timer LED
•
indicator will light up as
shown below:
1 Hour: 1 Blink
•
2 Hours: 2 Blinks
•
4 Hours: 4 Blinks
•
8 Hours: 8 Blinks
•
12 Hours: 12 Blinks
•
Continuous On: Off
•
NOTES ON OPERATION
If the Dip Switch is not configured correctly, all the indicators on the Hub will stay solid when the
•
Hub is powered on. Please switch off power and re-configure the Dip Switch as shown in Figure 3.1A
abpve.
QUIETCOOLSYSTEMS.COM
Attach green ground wires to ground screw
POWER
TIMER
TEST
PAIR
All White Common Wires Together
POWER
TIMER
TEST
Set dip switches:
1 - ON
2 - OFF
3 - OFF
ON
1
2
3
TEST INDICATOR
The Test LED indicator will light
•
up as shown below when the
Test button is pressed and when
the fan is turned on via the Wall
Switch:
High Speed: LED indicator will
•
blink three times every two
seconds.
PAIR
PAIR INDICATOR
The Pair LED indicator will
•
light up when making pair
operations. Please see
below for details on pairing.
Power
Cord
9