Finding A Location For The Wall Switch; Installing The Wall Switch - QuietCool GA ES-1500 Owner's Manual

3.4

FINDING A LOCATION FOR THE WALL SWITCH

1. It is very important to find the correct location to install the Wall Switch that will allow
the Wall Switch to communicate with the Hub.
2. Find the location you would like to install the Wall Switch and test that it properly
communicates with the fan to turn the fan on and off.
3. If the fan comes on, this is a good location.
4. If all the LED indicators turn on, the Wall Switch is not communicating with the Hub
and you will need to find a location closer to the fan.
3.5

INSTALLING THE WALL SWITCH

1. Using your hands, slide the Wall Switch off the
mounting plate.
2. If you have an existing Wall Switch with a junction
box installed, install the mounting plate over the junction
box using the oblong holes on the mounting plate. Make
sure you install the mounting plate with the arrow
facing upwards.
3. If you do not have an existing junction box, simply
install the mounting plate to the drywall. Using the
included drywall anchors and screws, mount the plate
onto the drywall through the four mounting holes.
QUIETCOOLSYSTEMS.COM
1 2 4 8 12
H
M
L
11