Download Print this page

Infinite L-COM PXCNTMR Series User Manual page 2

Contact sensor

Advertisement

Cautions for use:
(1) Although this product is expected to work perfectly, an operating mistake or
malfunction may have the potential to develop into a major personal accident or
cause increased damage. Hence, it is recommended to take safety measures such
as setting up a double circuit.
(2) Please do not press the buttons with exceeded force as that may cause damage.
(3) If the product is exposed to a strong magnetic field (above 1000 Gauss), it may
result in operating error.
Electrical wiring considerations:
(1) It is strongly recommended to prevent reverse connection by following the wiring
example for correct wiring. Please do not reverse the power supply.
(2) When driving the relay below 12ma, connect the diode in a parallel manner.
Installation Precautions:
(1) Please follow the specified torque of various sensors while mounting.
(2) Short Line for Cable Outlet:
(i). Do not apply excessive pressure on the cable outlet of the sensor (tensile strength
20N, minimum bend radius R7).
(ii). When the cable is moving, fix the cable in the middle to avoid stress on the outlet.
1. L-com will repair the product free of charge if there is a malfunction caused by L-com
Company within the above-mentioned warranty period. But the following will not be
covered by the warranty:
• Damage caused due to failure in following operating instructions or user manual
specifically, when the L-com company has fulfilled the technical requirements in the
given environment.
• Malfunction that occurs due to purchaser's equipment or software rather than product
defects.
• Malfunction caused by modifications or repairs by non-L-com company personnel.
(Please ensure that correct repair or replacement of wearing parts is done in
accordance with the operating instructions or provided user manual to avoid
malfunction.)
• Malfunction or inefficiency of the product after delivery caused due to unpredictable
changes in science and technology.
• Damage or malfunction caused by fire, earthquake, floods and/or other natural disasters
or abnormal voltage and other external factors.
2. The warranty is limited to the conditions specified in Article (1), and L-com Company
shall not be liable for any indirect loss (damage to equipment, loss of opportunity, loss of
profits, etc.) or other loss caused by its equipment.

Advertisement

loading

This manual is also suitable for:

L-com pxcntmr-t6-b/ledL-com pxcntmr-t8a-b/ledL-com pxcntmr-t8b-tx