Page 1
LINEAR AC SENSOR & OVER-CURRENT PROTECTOR User Guide for SRCN-C262 Product Description This module is used to measure and monitor current consumption by utilizing electromagnetic current transformer technology. A voltage output is produced in direct proportion to the measured current. If the current exceeds a preset value, the relay on the module is activated. Uses include building automation and facility management systems, where acquiring information on energy usage can lead to increased efficiency.
Page 2
Technical Parameters Working voltage 24 VDC ± 0.5 VDC Before protection ≤ 25 mA Working current After protection ≤ 90 mA Working temperature 0 70 °C Working humidity 10 90% (No condensation) Detection range 0 20 A Relay output Output mode Analog output...
Page 3
Board Mount Mount the PCB to the enclosure with screws. Mounting hole diameter is 3mm. Notes The module can only be powered by 24 VDC. The module has reverse voltage protection function and power indicator lights (N: green light, L: yellow light) to help with power connection. Set the current threshold to 2 A.